Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Charles Freeborns entry
http://www-.luthiersforum.com/forum/viewtopic.php?f=10133&t=38054		 Page 1 of 1
Author:  Chas Freeborn [ Tue Oct 23, 2012 4:28 pm ]
Post subject:  Charles Freeborns entry
Here's what's underway so far:
A new model - sort of - this is my quatre model (0000) with the mold sleeved down 1" overall, so it is now a 15" lower bout. 13 frets clear, my new "tweener" scale of 25.23", materials breakdown and costs below.


Untitled by Charles Freeborn, on Flickr

Image
Untitled by Charles Freeborn, on Flickr

Image

Untitled by Charles Freeborn, on Flickr
Image
Untitled by Charles Freeborn, on Flickr
Image
Untitled by Charles Freeborn, on Flickr

2A grade Lutz top $14
Lumberyard leftover Maple B/S .875 B.F @ 7.5 = $6.56
Lumberyard leftover Maple Neck 1.75 B.F. @ $8.00 = $14
Misc Lumberyard Sitka for bracing 1 B.F. @ $7 = $7
1 Beauguard materials for binding, pickguard and headstock (incl inlay) $20
1 Truss rod $14
1 Fretwire ? (never calculated this out before)
1 Piece re-claimed Nara flooring for fingerboard and bridge $4
1 Finish materials ( shellac sealer, gel poly varnish is the plan) $7
Misc kerfing and blocks $10
Tuners TBD....

If I can scare up a set of tuners for $10 and a burlap sac for a gig bag it'll come in right around $100.....
-C
Author:  WudWerkr [ Tue Oct 23, 2012 4:31 pm ]
Post subject:  Re: Charles Freeborns entry
Lookin Good ! [:Y:]
Author:  StevenWheeler [ Tue Oct 23, 2012 7:11 pm ]
Post subject:  Re: Charles Freeborns entry
Interesting profile on the X braces. Figure $4 to $6 for the frets depending on the quantity you purchase.
I like how you charged yourself for your own binding and inlay material.

Steve
Author:  Chas Freeborn [ Thu Oct 25, 2012 4:53 pm ]
Post subject:  Re: Charles Freeborns entry
Box closed. When the other 3 underway are caught up I'll start neckin' 'em.
-C
Image
Untitled by Charles Freeborn, on Flickr

Image
Untitled by Charles Freeborn, on Flickr
Author:  Chas Freeborn [ Sat Dec 29, 2012 8:17 pm ]
Post subject:  Re: Charles Freeborns entry
Necks fit on the 2 Quatres, but the 2 Freestyles are waiting for some re-engineering of their neck joints.
I could have pushed the Petit forward, but I'd rather retain the efficiency of the batch and move them through the shop together. They'll all be done sometime in January.
If you want to see it you'll have to visit me at the Healdsburg Guitar Festival. One of my resolutions for the new year is to spend less times on forums, so I'll be signing off from this one. Best of luck to you all on the competition and all your guitar building adventures.
-C
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/